Laserfiche WebLink
CITY OF SANTA ANA <br /> SPECIFICATIONS <br /> PROJECT NO.: 25-6030 <br /> TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br /> AVENUE <br /> Written warranty must be provided by manufacturer for full replacement of the luminaire <br /> due to any failure for a minimum period of seven (7) years. Luminaires shall, at the sole <br /> discretion of the City,be repaired or replaced if the luminaire fails to function as described <br /> in the above specifications for a period of eighty-four(84)months from date of installation. <br /> All luminaires shall be SCE prequalified. <br /> 4.28 CONDUCTOR LABELING <br /> Conductors shall be labeled in all pull boxes and in the traffic signal cabinet. <br /> 1. Labeling Convention: <br /> a. Conductor Signal Cable shall be labeled to indicate cable size and signal phases <br /> (Ex. 12 CSC, Pl&6 for 12 conductor cable,phases 1 & 6). <br /> b. Detector Lead-In cable shall be label to show detector designation per plan(Ex. <br /> DLC 1-P2, DLC 2-P2). <br /> c. System Detection Lead-In cable (SDLC) shall be labeled to show detector <br /> designation per plan(Ex. SDLC-SD1 for system detection SD1) <br /> d. Signal Interconnect cable (SIC) shall be labeled to size and content (Ex. <br /> 12PR#19). <br /> e. Video Detection(VD)cable shall be labeled to indicate video camera and phase <br /> or power(Ex.VD-P8 for phase 8 video camera cables or VD-P8 PWR for phase <br /> 8 Video camera power cable). <br /> f Emergency Vehicle Pre-emption Cable shall be labeled to indicate EVP and <br /> phase or power(Ex. EVP-A for EVP cable channel A or EVP-A PWR for EVP <br /> power cable). <br /> g. Closed Circuit Television (CCTV) cable shall be labeled to indicate camera or <br /> power(Ex. CCTV-1 for CCTV camera 1 or CCTV-1 PWR for CCTV 1 power <br /> cable). <br /> h. Changeable Message Signs cable shall be labeled to indicate sign or power(Ex. <br /> CMS-1 for sign 1 or CMS-1 PWR for sign 1 power cable). <br /> i. Individual traffic signal conductor or street lighting conductor shall not be <br /> labeled in the pull boxes. Traffic signal conductor shall be labeled to show <br /> phase in the traffic signal cabinet only. <br /> 71 <br />