Laserfiche WebLink
CITY OF SANTA ANA <br /> SPECIFICATIONS <br /> PROJECT NO.: 25-6030 <br /> TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br /> AVENUE <br /> The aluminum mounting brackets shall be adjustable (MD Solutions Inc. <br /> Oscillating Mast Arm Bracket-Adj or equivalent). <br /> When installation of the sign to the mast arm is complete, the sign should swing <br /> freely 90 degrees in both directions when moved by the installer. <br /> 5. Finish: <br /> The finished sign shall be flat within a ratio of 0.40" (10 mm)per linear foot when <br /> measured across the plane of each panel from opposite corners or at any location <br /> on the panel. All finished signs shall have a smooth flat surface without defects or <br /> objectionable marks of any kind on either the front or the back faces. All letters <br /> and designs shall be clearly cut and sharply defined. <br /> The appearance of the sign face shall be uniform throughout and shall be free of <br /> wrinldes, gel, hard spots, streaks, extrusion marks, air bubbles or blemishes that <br /> may impair the serviceability, detract from the general appearance or color- <br /> matching of the sign when viewed from a distance of twenty-five(25) feet(7.5 m). <br /> The finished sign shall be clean and free from all burns, sharp edges, loose rivets <br /> and aluminum marks. <br /> Signs with any defects or damage that affect their appearance and serviceability <br /> will not be acceptable. All metal parts shall be fabricated in a uniform and quality <br /> workmanlike manner with all sign surfaces and edges free of defects. No repairs <br /> shall be made to the face sheet without the approval of the City inspectors. <br /> 4.31 REMOVING, REINSTALLING, OR SALVAGING ELECTRICAL EQUIPMENT <br /> Salvaging and stockpiling electrical equipment shall conform to the provisions in Section <br /> 15, "Existing Facilities," of the Caltrans Standard Specifications and these Special <br /> Provisions. <br /> When called for on the plan, salvaged equipment shall be delivered to the City of Santa <br /> Ana Public Works Agency Maintenance Yard, Santa Ana. The Contractor shall notify the <br /> City a minimum of two working days prior to delivery of salvaged equipment. <br /> Existing equipment removed and not to be reused or salvaged to the City of Santa Ana <br /> shall become the property of the Contractor and shall be removed from the site by the <br /> Contractor. The Contractor shall provide all labor, equipment, and materials necessary to <br /> remove, salvage,transport, and dispose of equipment not reused. <br /> All reused or relocated vehicle and pedestrian heads shall be painted to match new <br /> equipment color. <br /> 75 <br />