Laserfiche WebLink
PART 1 <br /> <br />1.01 <br /> <br /> A. <br /> <br />SECTION 16050 <br /> <br />BASIC MATERIALS AND METHODS <br /> <br />GENERAL <br /> <br />WORK INCLUDED <br /> <br />Provide complete Electrical service and distribution system and lighting system where <br />shown on Drawings, as specified herein and as needed for a complete and proper <br />installation including, but not necessarily limited to: <br /> <br />1. Conduit and fittings. <br />2. Distribution Switchboard. <br />3. Outlet boxes. <br />4. Wire and cable. <br />5. Wiring devices. <br />6. Cover plates. <br />7. Panelboards. <br />8. Circuit breakers. <br />9. Dry type transformers. <br /> 10. Lighting fixtures. <br /> <br />1.02 <br /> <br /> A. <br /> <br />1.03 <br /> <br /> A. <br /> <br />RELATED WORK <br /> <br />Documents affecting work of this Section include, but are not by necessarity limited to, <br />General Conditions, Supplementary Conditions, and Sections in Division 1 of this <br />Specification. <br /> <br />Section 16000, Electrical Provisions, forms an integral part of this Section and <br />Sections of Division 16. <br /> <br />SUBMITTALS <br /> <br />Comply with pertinent provisions of Section 01340, Submittals and Substitutions; <br />Section 16000, Electrical Provisions; and the following: <br /> <br />1. Shop Drawings: Provide Shop Drawings for the following: <br /> <br />a. Panelboards. <br />b. Circuit breakers. <br />c. Lighting fixtures. <br />d. Transformers. <br /> <br />BASIC MATERIALS AND METHODS 16050-1 <br /> <br /> <br />