J & G INDUSTRIES, INC. 1 -2006 - Laserfiche WebLink

Home Browse Search

I City of Santa Ana February 15, 2006 Request for Qualifications - Demolition Services B. Approach The following is a description of our anticipated approach to implement the CTOs upon CSA's authorization ?. to proceed with the work. J&G's assigned Project Manager will first manage the services that are required to be performed within 24 hours of CTO execution. If required, fencing and boarding will be installed to secure the site. All necessary notices, ordinances, statues rules, laws, and regulations shall be followed in the performance of the CTO. Notifications/ permits may include: city grading, city demolition, city sewer capping, Orange County Health Care Agency (OCHCA) tank closure, OCHCA water well closure, OCHCA monitoring well closure, South Coast Air Quality Management District (SCAQMD) demolition, SCAQMD asbestos abatement, SCAQMD VOC containing tank or soil abatement, OSHA excavation, OSHA falsework, OSHA over height, and OSHA scaffolding. j The Project Manager will direct J&G's consultant to prepare a Notice of Intent (NOI) to comply with the terms of the general permit to discharge storm water associated with construction activity, for sites that are one acre or larger in size. The Project Manager will submit the NOI and permit fee to the State Water Resources Control Board. When required, the Project Manager will direct J&G's consultant to prepare a Construction Storm Water Pollution Prevention Plan (SWPPP). Storm water best management practices will be implemented as needed for compliance with the SWPPP. A site specific Health & Safety Plan will be prepared for the project. The Field Superintendent will conduct periodic tailgate Health & Safety meetings, to cover health and safety issues with field workers. J&G's consultant will periodically conduct site safety inspections. Results are given to the Project Manager for directing changes. Underground Service Alert will be contacted to have the location of utilities marked. The Project Manager shall contact utility companies to coordinate any required utility terminations. Where required, sewer capping will occur at the beginning of work. The Field Superintendent will be on site at the time the agency is scheduled to inspect the utility termination. Care shall be taken to perform the services so as not to endanger the safety of any person or property. At the start of the CTO, the Field Superintendent will visually survey existing improvements and utilities near the work site, in order to protect them from damage. Field Superintendent will also visually survey the site for potential materials containing regulated/hazardous wastes. The Project Manager will contact CSA of any findings. As directed by the CSA, the Project Manger will arrange for J&G's consultant to perform an asbestos and lead-based paint survey and an abatement plan for the asbestos and lead containing materials removal and disposal. When an asbestos and lead-based paint survey has been previously prepared, the Project Manager will arrange for J&G's consultant to prepare an abatement plan. The abatement plan will be submitted to the SCAQMD for their approval. The Project Manger shall confirm that all required licenses, permits and certifications have been acquired for implementing the abatement plan. The Project Manager will submit the SCAQMD approved abatement plan for CSA approval to proceed with its implementation. Upon CSA's approval, J&G's abatement subcontractor will implement the abatement plan. Field Superintendent will verify waste is properly manifested for disposal at proper facility. Upon completion of abatement plan implementation, the Field Superintendent will conduct a pre-demolition survey to identify: that the asbestos, lead, regulated and hazardous wastes have been removed as per their abatement plans; verify monitoring records; verify proper manifesting of waste disposal; visually verify no other hazardous materials are left in demolition area; as required, verify site is secured by appropriate fencing; verify that appropriate protection devices are in place, such as pedestrian protection canopy; verify J&G Industries Page 8