Laserfiche WebLink
B. In addition, new walls and ceilings shall comply with applicable codes, standards and <br />requirements adopted by the City of Santa Ana. <br />INTERIOR FLOORS <br />A. Interior floors shall be properly supported and structurally sound. They shall be void <br />of holes, large cracks and any hazardous deterioration and/or damage. <br />B. In addition, new floors shall comply with applicable codes, standards and <br />requirements adopted by the City of Santa Ana. <br />FLOOR COVERING <br />A. Floor covering shall be void of any hazardous deterioration and/or damage. Floor <br />coverings shall be sanitary and void of mold and Ringus. <br />B. In addition, new floor covering shall comply with the following standards: <br />(1) Medium duty carpet and 1/2" pad. <br />(2) Medium duty sheet vinyl, vinyl tiles or ceramic floor tiles. <br />(3) Proper preparation of the sub -floor. <br />INTERIOR DOORS <br />A. Interior doors s shall operate smoothly and be void of missing and/or damaged <br />hardware. They shall be void of holes and any hazardous deterioration and/or <br />damage. <br />B. In addition, new doors shall comply with applicable codes, standards and <br />requirements adopted by the City of Santa Ana. <br />ELECTRICAL SWITCHES AND OUTLETS <br />A. EIectrical switches and outlets shall be operable and void of missing and/or damaged <br />cover plates. Outlets shall be GFCI protected if located within 6 feet of a sink or any <br />other open source of water. If existing wiring in building does not provide for ground <br />wires, than any new GFCI outlet shall be identified "non -grounded". (City shall <br />supply Association one time with appropriate stickers.) <br />B. In addition, new electrical switches and outlets shall comply with applicable codes, <br />standards and requirements adopted by the City of Santa Ana. <br />LIGHT FIXTURES <br />A. Light fixtures shall be operable and void of missing and/or damaged globes. <br />EXHIBIT H: Page 4 of 8 <br />