Laserfiche WebLink
d. An initial average of 50 -75 foot candles shall be maintained from <br />interior lot lighting with a maximum to minimum uniformity of three <br />to one. Frontline lighting shall have a maximum to minimum uni- <br />formity of one and one -half to one, and initial average of 75 -100 <br />foot candles. <br />e. The bronze anodized aluminum poles are to be square in cross sec- <br />tion and shall be continuous to ground mounting level with adequate <br />protection by means of a raised six -inch circular concrete curb <br />with a minimum three -foot radius. <br />f. The average spacing for interior lot poles with two luminaires per <br />pole is to be sixty feet center to center. This is based on a <br />typical 60 -65 foot aisle width. The spacing for all lot front- <br />line poles with single inward facing luminaires is to be forty feet <br />center to center. <br />Independent city street lighting is desired in addition to spill- <br />over dealer lot lighting. At each street light location, two lumin- <br />aires (one for dealer lot lighting and the other for city street <br />lighting) will be installed on one pole. These luminaires will be <br />the same and placed on separate circuits. The mounting height shall <br />also be the same (twenty -four feet) with spacing in multiples of <br />eighty feet. Placement of these street lighting poles should be <br />staggered on either side of the street, for street lighting efficiency. <br />- 20- <br />9 <br />