Laserfiche WebLink
c- <br />e <br />sprinklers <br />0 <br />Quick - response type as defined in 3,6.4.8 <br />2. Residential sprinklers in accordance with the requirements of 8,4.5 <br />3. Quick response CMSA sprinklers <br />4. ESFR sprinklers <br />5. Standard - response sprinklers used for modifications or additions to <br />existing light hazard systems equipped with standard - response <br />sprinklers <br />6. Standard - response sprinklers used where individual standard - response <br />sprinklers are replaced in existing light hazard systems <br />a- <br />�_� - <br />e <br />"' <br />,. <br />ee <br />2 MW <br />e- <br />(4) Section 11.1.1.1 is hereby added as follows: <br />11.1.1.1 When fire sprinkler systems are required in buildings of undetermined <br />use other than warehouses, they shall be designed and installed to have a fire <br />sprinkler density of not less than that required for an Ordinary Hazard Group 2 <br />use, with no reduction(s) in density or design area. Warehouse fire sprinkler <br />systems shall be designed to Figure 16.2.1.3.2 (d) curve "G ". Use is considered <br />undetermined if a specific tenant /occupant is not identified at the time the <br />sprinkler plan is submitted, Where a subsequent occupancy requires a system <br />with greater capability, it shall be the responsibility of the occupant to upgrade <br />the system to the required density for the new occupancy. <br />(5) Section 11.2.3.1.1.1 is hereby added as follows: <br />Ordinance No. NS -XXXX <br />Page 44 of 61 <br />75A -68 <br />