Laserfiche WebLink
YEARS EXPERIENCE <br />3 years <br />LICENSES / <br />CERTIFICATIONS <br />Professional Civil <br />Engineer. California. <br />No.C90365 <br />EDUCATION <br />M.S., Civil and <br />Environmental <br />Engineering, <br />California Polytechnic <br />State University, <br />San Luis Obispo. CA <br />B.S.,-Environmental <br />Engineering, <br />California Polytechnic <br />State University, <br />San Luis Obispo, CA <br />SOFTWARE SKILLS <br />• AutoCAD Civil 3D <br />• NlicroStation <br />• ArcGIS <br />• FLOW-3D <br />• FLO-2D <br />• HEC-HNiS <br />• HEC-RAS <br />• NIATLAB <br />"ii. 't`j'i131 ( ' <br />Civil <br />Professional Summary <br />At v.irawsl,, is a .i:r! =_ngmea speoali g;n water a -1 asce,var t -atmar c- b ;tn <br />c trap: ed and de er-traliz d il,7tems. O -er his past rho years at BRADY he ha. assisted with <br />numerous iscrvoir inspections and the design and dienirgof sa , al -tensry 1 pro eels. iris <br />attention to detail and proficient use of AutoCAD C!vil 3D aid in creating profiles site grading <br />plans, and detaded design drawings. <br />Project Experience <br />Project Engineer/Designer - HB S 1 Reservoir Rehabilitation, Vista Irrigation District, CA <br />Designed new inlet/outlet yard piping for the HB reservoir to improve reservoir mixing and water <br />qualat. Designed civil site worn surrounding reservoir to include grading plan, paving plan, and <br />I <br />eneral site layout. Sized site drainage features for design rain event. Compiled contract <br />documents. including' oasis of design report, plans, and specifications. <br />Project Engineer/Designer - Pressure Reducing Stations, Upland, CA <br />Analyzed the distrib, pon system hydraulics for the City of Upland. CA to determine how to <br />effectively implement pressure reducing stations to increase operation flexibility during future <br />system rehabilitation and emergency situations, implemented pressure data loggers to track and <br />analyze system pressures at proposed pressure reducing station locations and areas of concern, <br />indicated from the hydraulic model. "this data was used to establish set points for Che pressure <br />reducing valves. <br />Researched existing utilities and created site plans for each proposed location. Pipeline profiles <br />were created to indicate connections to existing pipelines and astablish vertical spacing <br />requirements for existing utility crossings. <br />Project Engineer/Designer - B MG Steel Reservoirs No.1 and No.2 inspection, Westminster, CA <br />Inspected two existing above ground steel reservoirs for interior and exterior coating failure. <br />Coating Failure. primarily on the interior of the reservoir. resulted in corrosion of roofing members. <br />Coating defects were mapped and quantified to determine the most efficient and economics) <br />solution to increase the resarvoiis service life. A report was submitted to the client, which <br />emphasized the results of the inspection and recommendations for repair. <br />Project Engineer/Designer - HB 5 MG Reservoir Inspection, Vista Irrigation District, CA <br />Inspected existing above ground prestressed concrete reservoir with concrete dome roof for <br />structural deficiencies. The inspection focused on identifying cracks and spalling of the reservoir <br />footing. wall, and roof. These structural deficiencies were mapped and repair suggestions were <br />submitted to the client along with report on inspection findings. <br />Project Enginoer/Designer - Pechsteln 20 MG Reservoir Roof Inspection, Vista irrigation District <br />CA <br />Inspected existing partially buried prestressed concrete reservoir with wooden roof for structural <br />deficiencies. Inspection focused on identifying and quantifying areas of corrosion in roofing <br />hardware and locations of dry rot, delaminatlon, and checking within the glulam beams. The <br />reservo,r roof was inspected from the outside of the reservoir as well as by boat on the inside of <br />the reservoir. Structural deficiencies were mapped and a report was submitted to the client, which <br />highlighted findings and proposed that a new aluminum dome roof be Installed to increase the <br />reset noire useful life. <br />Project Engineer/Designer - Electrical Vault Inspection, HA Builder Group, CA <br />Inspected existing underground electrical vault for structural deficiencies, including eonciere <br />cracks and spalling. Developed repair plans for the replacement of the existing steel vault cover <br />and eor,.entional concrete snail repairs around vault opening. <br />Project Engineer/Designer - Retaining Wall Inspection and Design for Regulator Station, SDG&rE, <br />CA <br />Inspected existing screen wall surrounding regulator station for concrete cracks and spalling. <br />Developed repair plans for eeistirg screen wall defects and profile for new re*aining wall for site <br />expansion. <br />RICHARD BRADY &ASSOCIATES, INC. E-37 <br />