Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO.: 25-6030 <br />TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br />AVENUE <br />Written warranty must be provided by manufacturer for full replacement of the luminaire <br />due to any failure for a minimum period of seven (7) years. Luminaires shall, at the sole <br />discretion of the City, be repaired or replaced if the luminaire fails to function as described <br />in the above specifications for a period of eighty-four (84) months from date of installation. <br />All luminaires shall be SCE prequalified. <br />4.28 CONDUCTOR LABELING <br />Conductors shall be labeled in all pull boxes and in the traffic signal cabinet. <br />1. Labeling Convention: <br />a. Conductor Signal Cable shall be labeled to indicate cable size and signal phases <br />(Ex. 12 CSC, P 1 &6 for 12 conductor cable, phases 1 & 6). <br />b. Detector Lead -In cable shall be label to show detector designation per plan (Ex. <br />DLC I-P2, DLC 2-P2). <br />c. System Detection Lead -In cable (SDLC) shall be labeled to show detector <br />designation per plan (Ex. SDLC-SD 1 for system detection SDI) <br />d. Signal Interconnect cable (SIC) shall be labeled to size and content (Ex. <br />12PR# 19). <br />e. Video Detection (VD) cable shall be labeled to indicate video camera and phase <br />or power (Ex. VD-P8 for phase 8 video camera cables or VD-P8 PWR for phase <br />8 Video camera power cable). <br />f. Emergency Vehicle Pre-emption Cable shall be labeled to indicate EVP and <br />phase or power (Ex. EVP-A for EVP cable channel A or EVP-A PWR for EVP <br />power cable). <br />g. Closed Circuit Television (CCTV) cable shall be labeled to indicate camera or <br />power (Ex. CCTV -I for CCTV camera I or CCTV-1 PWR for CCTV 1 power <br />cable). <br />h. Changeable Message Signs cable shall be labeled to indicate sign or power (Ex. <br />CMS-1 for sign 1 or CMS-1 PWR for sign 1 power cable). <br />i. Individual traffic signal conductor or street lighting conductor shall not be <br />labeled in the pull boxes. Traffic signal conductor shall be labeled to show <br />phase in the traffic signal cabinet only. <br />71 <br />