Item 18 - Traffic Signal Installation at Segerstrom Avenue and Rosewood Avenue

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO.: 25-6030 TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD AVENUE an Ethernet switch in the cabinet to establish circuit continuity. The cable shall be installed without damaging the conductors, dielectric or jacket. The cable assembly shall not be kinked or bent tighter than the Manufacturer's recommended bending radius. 3. Testing The Contractor shall test and document the installation and operation of all material, equipment, cables and connectors for continuity, shorts or grounds. The Contractor shall also carry out system integration testing to ensure that the video interface and camera interconnect wiring performs to the specified standards when used in operation with all other devices installed under the contract. 4. Warranty The Contractor shall provide a warranty for all equipment installed or modified under these projects for the extended warranty period provided by the manufacturer. The warranty shall be 12 months from the time the Agency accepts the Project. The warranty on all parts and equipment used on these projects shall be provided by the manufacturer or agent of the equipment. The Contractor shall provide, at no cost to the Agency, all labor, materials, testing, and equipment required restoring the system to its fully operational condition. Following this warranty period, the Contractor shall assign to the Agency the balance of the manufacturer's warrantees or guarantees on all electrical and mechanical equipment of the system. 4.34 IP COMMUNICATION SYSTEM When required by the plan, the contractor shall supply and install necessary equipment to establish communication via IP addressing between the City Advanced Traffic Management System (ATMS) and existing field devices or field devices being installed. - Etherwan Hardened -Managed Fiber Optic Ethernet Switch — EX78934X-OVB w/ Hardened Power Supply (Quantity-- 1) - Etherwan Hardened 1 G BASE SFP Fiber Transceiver — SFPGIS20M (Quantity= 4) - Corning Cable Systems Closet Connector Housing CCH-01U (Quantity--- 2) - Corning Splice Tray (Quantity-- 2) - Corning SC Duplex Connector Panel — CCH-CP12-59 (Quantity= 2) - Fiber Optic Patch Cord — duplex, single -mode — SC to LC connectors — 3 meters (Quantity= 4) - CAT-5 Patch Cord - 2 meters (Quantity= 4) 4.35 PAYMENT Payment for any items of work required by the plans, the specifications or other reference documents that are not covered by a contract bid item shall be considered as included in other bid items. RX