Laserfiche WebLink
CITY OF SANTA ANA <br /> SPECIFICATIONS <br /> PROJECT NO.: 25-6030 <br /> TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br /> AVENUE <br /> When an Accessible Pedestrian Signal(APS)system is required by the plans,the system shall <br /> conform to Section 86-1.02T, "Accessible Pedestrian Signals," of the Caltrans Standard <br /> Specifications and these special provisions. The Contractor shall furnish and install Polara <br /> iNS2 iNavigator 2-wire system as shown on the plan. The APS system shall include Polara <br /> iNS2 INavigator 2-wire Push Button Station(iN2 5ANO-B),iCCU-S2 Control Unit(Shelf <br /> Mount Control Unit) and all necessary equipment, mounts, cabling, connectors, and any <br /> other items necessary to provide the intended operation as shown on the plans. <br /> All exposed fasteners shall have anti-seize compound(NOA-Lox or Agency approved equal) <br /> applied before installation. <br /> 4.25 VIDEO DETECTION SYSTEM <br /> When video detection is required, the Contractor shall furnish and install rack mounted <br /> Video Detection System as shown on the plan. The video detection system shall include <br /> cameras with zoom lens with an integrated adjustable sunshield, all mounting hardware <br /> (video detector camera mounting bracket or video detector camera pole mount extension <br /> bracket), communications interface panel, detector port master, video detector cable, all <br /> associated equipment or miscellaneous fittings (cabinet wiring), labor, materials, and any <br /> other items necessary to provide the intended operation as shown on the plans. All of the <br /> video detection system components shall be current production equipment produced by the <br /> same manufacturer (for system operation compatibility purposes) unless otherwise noted <br /> herein or approved in advance by the Engineer. <br /> The Video Detection System shall be an Econolite Autoscope Vision Video Detection <br /> System or approved equivalent. <br /> 4.26 EMERGENCY VEHICLE PREEMPTION(EVP) SYSTEM <br /> When EVP is required, the Contractor shall furnish and install a rack mounted Global <br /> Traffic Technologies (GTT) OpticomTM GPS System as shown on the plans. Phase <br /> selectors shall be 764, as shown on the plans. Radio/GPS Unit shall be Model 3100 as <br /> shown on the plans. <br /> Radio/GPS unit shall be mounted on the traffic signal pole and shall be mounted level and <br /> extended 3 feet away from pole unless noted otherwise. <br /> The EVP cables shall be GTT OpticomTM Model 1070. EVP cables shall be labeled in a <br /> permanent, color-coded manner in each pull box and the traffic signal controller cabinet <br /> indicating the vehicle signal phase and direction. EVP cables shall not be spliced <br /> 4.27 LIGHT EMITTING DIODE(LED) LUMINAIRES <br /> All new luminaires shall be light emitting diode(LED), I.E.S. Type III distribution, full cut- <br /> off, as shown on the plans. All new luminaires shall be Leotek GreenCobraTM GCM2-40H- <br /> MV-NW-3R-GY-700-PCR7-WL LED Street Light. Each luminaire shall be equipped with <br /> photoelectric control. <br /> 70 <br />