SIEMENS BUILDING TECH 1 -2003 - Laserfiche WebLink

Home Browse Search

Upon completion of the installation of the lighting fixtures and lighting equipment, they must be in first-class operating order and in perfect condition as to finish, etc. Check for proper operation and appearance, aligmnent of fixtures and proper placement of lenses, louvers, lamps and other light-controlling or modifying appurtenances. Where special lighting effects, flood or spotlighting is involved, perform final adjustment under the direct supervision of Engineer. Cleaning: Immediately prior to occupancy, damp clean all lenses, lighting fixture trims, reflectors, clean lamps or install new lamps as directed, with lenses and fixtures free of labels. Use of Lighting Fixtures: As soon as any portion of lighting fixture work is ready for operation, the Owner shall have the right to operate the same under the supervision of the Contractor. This shall in no way be interpreted to mean the acceptance of such part of the installation or relieve the Contractor of his responsibility for the complete work or any part thereof. Color and type of finish of all lighting fixtures as approved by the Engineer. Install fixtures and accessories in accordance with manufacturer's recommendations and industry standard practice. Q. Coordinate work of this section with that of other trades. 3.07 SWITCHBOARD Provide a 2.5-inch high concrete slab for all floor standing switchboards and motor control centers. Extend slab 3 inches beyond equipment base on front, back, and sides. 3.08 INSTALLATION OF DRY TYPE TRANSFORMER Use liquid tight flexible conduit for primary and secondary connections not exceeding 18 inches in length for all transformer line and load connections. Provide a separate equipment ground conductor in such flexible connections. BASIC MATERIALS AND METHODS 16050-21