AMEC GEOMATRIX, INC. 2 - 2011 - Laserfiche WebLink

Home Browse Search

S amet`y INDUSTRIAL/COMMERCIAL INSPECTOR TRAINING OUTLINE North Orange County MS4 Permit Prepared by: AMEC procedures. This includes appropriate contact lists for the City. Each inspector must be familiar with the procedure to follow when an illicit discharge or illicit connection is observed in the field during the course of an inspection. At a minimum, a call must be placed to the project manager and a follow -up a -mail with an explanation of the incident and associated photos must be sent within 9 business day of the observation. This information will be forwarded to the City. If the release appears to be an immediate threat to human health or the environment, the City (or 999 if appropriate) will be called immediately. ev ❑ Pollution Notification Investigation Report (PNIR) Review PNIR form and documentation requirements for City regarding tracking of ID /1C investigations. Field Training ❑ Perform 40 -hours of Joint inspections with experienced inspector ® Joint Inspections should focus on a cross - section of the industrial and commercial facilities that may be encountered. 24 -hours of joint inspections should be performed with the Al performing ® training taking the lead on the inspection. The remaining 16 -hours ofJoint inspections should be lead by the trainee. At a minimum, joint inspections will be performed at the following types of facilities: • High Priority Industrial Sites (covered under Industrial General Permit) — choose 3 -4 representative facilities (scrap /recycling, chemical manufacturing, auto dismantling) • Medium/Low Priority Industrial Sites — Inspect 2 -3 facilities (machine shops, wood working /cabinetry) • Commercial Facilities — inspect 3 -4 commercial operations. Inspections should focus on sites from the following list: automotive repair, nurseries, file /marble cutting (in some cases may be classified as industrial), landscaping, painting/coating, carpet cleaning, and - car washes. ❑ Initial Solo Inspections Inspector will perform one day of solo inspections following 40 -hours of joint inspections and the lead inspector /project manager review (see below). Following the first day of inspections, the Inspector will meet with the project manager to discuss the sites inspected and observations made at each site. The lead inspector /project manager will also review the completed inspection forms prior to sending the inspector out on additional solo inspections. ❑ Review of Field Inspection Forms All inspection forms are reviewed by the lead inspector /project manager prior to being sent out Suggestions regarding consistency and Interpretation as well as any other comment are provided to the inspector for review and revision, as necessary. Office /Classroom Training ❑ Review General Presentation on Industrial /Commercial inspection Program Includes Introduction language and step by step activities to complete NPOES inspection. Includes examples of scenarios encountered in the field and discussion of liability associated with performing inspections. Pt Page 2 of 3